We offer a variety of nozzles with internal diameters ranging from 0.010″ ~ 0.090″ featuring bodies made from brass, aluminum or stainless steel all with carbide tips.
Custom nozzles can be created for your project, contact us ( Email: Info@InternationalAJMcorp.com Or by phone : 570-785-7077 )
Part number |
Size / Specifications |
| 443-137 | Extra HD Tubing ( by the ft ) |
| 443-137-Roll | Extra HD Tubing ( 100meter Roll ) |
| HD Tubing ( Clear ) ( by the ft ) | |
| HD Tubing [Clear] ( 100meter Roll ) | |
| 444-31142 | Nozzle Adapter |
| 444-481A | HD Nozzle Connector (.070″ ID) |
| 444-482A | HD Nozzle Connector (.090″ ID) |
| 444-483A | HD Nozzle Connector (.080″ ID) |
| 444-540 | HD Handpiece |
Part number |
Size / Specifications |
| 444-303 | 0.018″ I.D. |
| 444-301 | 0.026″ I.D. |
| 444-302 | 0.032″ I.D. |
| 444-304 | 0.040″ I.D. |
| 444-305 | 0.048″ I.D. |
| 444-306 | 0.060″ I.D. |
Part number |
Size / Specifications |
| COM-1500-24 | 0.018″ ID |
| COM-1500-37 | 0.026″ ID |
| COM-1500-11 | 0.032″ ID |
| ? | 0.046″ ID ( gold anodizing ) |
| ? | 0.055″ ID |
| COM-1520-35 | 0.060″ ID |
| COM-211 | Rectangular orifice 0.12″ X 0.150″ ID |
| COM-SS-1501-14 | Right angle 0.032″ ID in Stainless steal body |
Part number |
Size / Specifications |
| COM-2110-1 | 0.60″ ID w/ HD body [Red] |
| COM-2110-3 | 0.80″ ID w/ HD body [ Blue anodizing ] |
| COM-2179 | HD hose connector |
Part number |
Size / Specifications |
| COM-SS-1501-14 | Right angle 0.032″ ID in Stainless Steal body |
| COM-SS-15 | Right angle 0.055″ ID in Stainless Steal body |
| ( insert drafting of AJM knurled nozzle ) |
| Part number | Size / Specifications |
| 444-153A | 0.018″ ID |
| 444-155A | 0.026″ ID |
| 444-157A | 0.032″ ID |
| 444-240A | 0.040″ ID |
| 444-246A | 0.046″ ID |
| 444-256A | 0.055″ ID |
| Light Duty Industrial Components ( For MJ7 0.75 L Equipment ) |
In order to produce the best results consistently while maximizing powder efficiency we recommend you “step down the ID of the carbide”. Meaning; from the powder chamber to the hand piece you continuously go down in ID size. The front panel fitting from the chamber is sized at 0.109″, the ID in the pinch valve may be 0.075″. You would then want a carbide connector below 0.075″. And a nozzle below the size of the connector. The mix up usually happens when using crossing lite duty & heavy duty components. Mainly around the pinch valve to hand piece. This will cause the pinch fittings to wear prematurely. So be aware of what set up you have when changing nozzle sizes. Our staff will gladly assist you in your replacement part needs.